Mathematically what you have should work. Are you using tool radius comp? Are you using an origin shift? These things could cause errors with some older Fanuc controllers.
Results 1 to 4 of 4
Threaded View
-
04-27-2018, 05:13 PM #3
Registered
- Join Date
- Nov 2009
- Posts
- 9
Re: Inventor HSM Fanuc post processor v Cincinnati Arrow with CT FNC 4 control
Reply With QuoteSimilar Threads
-
trouble with tool carousels on cincinnati arrow 2000 with fanuc 18i control
By metalman17 in forum Cincinnati CNCReplies: 2Last Post: 04-14-2016, 05:06 PM -
Post needed for siemens a2100 control Cincinnati milacron arrow 750
By elilco in forum Cincinnati CNCReplies: 1Last Post: 08-11-2015, 03:17 AM -
Cincinnati Arrow 500 with Fanuc 18iM control
By abmts in forum Cincinnati CNCReplies: 0Last Post: 04-09-2014, 07:34 AM -
Looking for Mastercam X4 Post Processor For My Cincinnati Arrow 750
By Calin B. in forum Post Processor FilesReplies: 4Last Post: 11-11-2013, 09:56 PM -
Offline control unit from a cincinnati Arrow
By Jimthefish in forum Cincinnati CNCReplies: 5Last Post: 10-24-2008, 02:59 AM
Tags for this Thread
Posting Permissions
