Have you tried setting the relay out to '9 'Arbitrary freq 2 reach' and set P0086 to the desired setting.
Al.
Results 1 to 20 of 21
Threaded View
-
05-10-2018, 04:26 AM #4
Community Moderator
- Join Date
- Dec 2003
- Posts
- 24220
Re: Huanyang VFD, activate relay when running below predefined RPM?
CNC, Mechatronics Integration and Custom Machine Design
“Logic will get you from A to B. Imagination will take you everywhere.”
Albert E.
Reply With QuoteSimilar Threads
-
Activate G54
By KJ11 in forum Mori Seiki lathesReplies: 13Last Post: 07-16-2019, 08:49 AM -
using a relay to activate a plasma torch (mach3)
By Delanoman in forum Mach Plasma / LaserReplies: 7Last Post: 08-26-2015, 12:33 AM -
how to activate the tailstok while the lathe is running.
By Dick1951 in forum OkumaReplies: 12Last Post: 03-29-2011, 04:40 PM -
24Vdc Solid State Relay not the same as mechanical relay??
By cjchands in forum CNC Machine Related ElectronicsReplies: 7Last Post: 11-10-2010, 07:40 AM -
Using a solid state relay as a main stop relay
By garagefela in forum CNC Machine Related ElectronicsReplies: 4Last Post: 02-26-2010, 11:27 PM
Tags for this Thread
Posting Permissions
