[A_Camera]

Congratulations and thank you! Even if it is unofficial and "as-is" I'd be very happy to try if I would have the problems and would depend on Mach3. Even though Mach3 is obsolete, it is really not good that it suddenly stops working, though the W10 1803 version is not yet globally distributed, which is good. Maybe there will be an 1804 soon, if more than Mach3 is affected, which will fix the issue.

[CRP]

Quick update; The lastest Mach3 download from Artsoft, v3.043.062, posted on their site contains the fix for Win 10 64bit 1803 (and beyond)! > http://www.machsupport.com/software/downloads-updates

Congratulations and thank you! ...

You are welcome!

Maybe there will be an 1804 soon, if more than Mach3 is affected, which will fix the issue.

Future Microsoft updates are very unlikely to address the root-cause, therefore either the patch or the updated Mach3 download is needed for builds including/beyond 1803.

Happy CNCing everyone!

-Nathan & CNCRP team

[A_Camera]

Quick update; The lastest Mach3 download from Artsoft, v3.043.062, posted on their site contains the fix for Win 10 64bit 1803 (and beyond)! > http://www.machsupport.com/software/downloads-updates

Thank you again.

Future Microsoft updates are very unlikely to address the root-cause...

That depends on what the root of the cause is. If it is caused by a bug in W10 then I am sure it will be addressed by MS, but if it is caused by Mach3 not following Windows standard or doing something that causes some issues, or has a bug then of course, MS will not bother. Never the less, it is very good that Artsoft and you acted very fast. It definitely results in many happy faces if Mach3 can be kept going for a while more even if it is obsolete, outdated and too old, it is still a very good and useful software.

[Voltatek]

Quick update; The lastest Mach3 download from Artsoft, v3.043.062, posted on their site contains the fix for Win 10 64bit 1803 (and beyond)! > http://www.machsupport.com/software/downloads-updates



You are welcome!



Future Microsoft updates are very unlikely to address the root-cause, therefore either the patch or the updated Mach3 download is needed for builds including/beyond 1803.

Happy CNCing everyone!

-Nathan & CNCRP team

Thank you for the info. It really helps because we where struggling finding a proper solution.
License for Mach3 is gonna work now https://voltatek.ca/92-cnc-software