Hi guys, somebody has parameters for Colchester tornado 200, one of the ROM memories fail and everithing is gone. Please help.
Hi guys, somebody has parameters for Colchester tornado 200, one of the ROM memories fail and everithing is gone. Please help.
have you resolved this ?
I have the same problem, somebody have the parameters
I have a collchester tornado 200
C20177 ?. Thanks in advance. Can you help with parameter list for Tornado 200 with serial
I'm also looking for parameters to collchester tornado 200 (1995) serial C20251.
Could you help me?
Thank you in advance
anyone can help me with sent me ladder in manual or .bin files. Colchester tornado 200 OM Controller.
i have Parameters & diagnostics already.
What does it say on the screen when you power up
I have a similar problem with a Colchester Tornado 200, serial number C20385 from 1996. All the parameters have gone, tried to write them manualy (i have them printed) but the 900 parameters are all 0, i tried copy them from a tornado 100. Everything ok, no alarm but the spindle, chucks, turret comands are not working. Can someone help me with the parameters? And i read something abaout diagnostics, are those parameters too? Thanks!
Hi Vlad
Tornado 100 parameters will be close but not correct as there are different models and veraions of the machine you may cause damage to your drives please send me your email address in a private message and I will try and assist
can anyone please help with Colchester Tornado 200 Lathe parameters and diagnosis.
TIA
send me your email and serial number as not clear in picture
There were different versions of 200 so would hate to send you incorrect ones