The fake ones usually will have different terminals, and different colored labels, often blue on the front.What make you say that this VFD is more "genuine" HY then others?
Thread: Which Spindle and VFD... again
Results 1 to 20 of 237
Threaded View
-
06-19-2018, 11:45 AM #10
Community Moderator
- Join Date
- Mar 2003
- Posts
- 35538
Re: Which Spindle and VFD... again
Gerry
UCCNC 2017 Screenset
http://www.thecncwoodworker.com/2017.html
Mach3 2010 Screenset
http://www.thecncwoodworker.com/2010.html
JointCAM - CNC Dovetails & Box Joints
http://www.g-forcecnc.com/jointcam.html
(Note: The opinions expressed in this post are my own and are not necessarily those of CNCzone and its management)
Reply With QuoteSimilar Threads
-
Quick Change Spindle Adapter for Chinese 2.2kw Spindle? Spindle acronyms?
By dameronw in forum Spindles / VFDReplies: 3Last Post: 10-19-2018, 05:12 PM -
G0704 Spindle bearing upgrade - Vertical play/slop on spindle shaft.
By Signal9 in forum Benchtop MachinesReplies: 35Last Post: 03-21-2017, 02:29 PM -
C11T board - spindle 0-10v output wandering and causing inconsistent spindle speed
By trogan in forum CNC4PCReplies: 6Last Post: 03-20-2017, 09:30 PM -
Spindle motor set,1pcs 2.2kw spindle + inverter+ spindle mount bracket+ER collet
By yvesleeok in forum News AnnouncementsReplies: 5Last Post: 07-19-2013, 05:16 AM -
mach3 spindle dro not working, spindle speed changing while jogging and running code
By jasminder in forum Mach Software (ArtSoft software)Replies: 0Last Post: 02-23-2011, 07:12 AM
Tags for this Thread
Posting Permissions
