587,472 active members*
3,338 visitors online*
Register for free
Login
IndustryArena Forum > Community Club House > main page pictures
Results 1 to 20 of 20
  1. #1
    Join Date
    Mar 2003
    Posts
    6855

    main page pictures

    Do you guys like the random pictures on the main page?

  2. #2
    Join Date
    Jan 2004
    Posts
    490
    I think its pretty cool. Just wish there were more new ones! Can't get enough photos!
    Stop talking about it and do it already!!!!!

    (Note: The opinions expressed in this post are my own and are not necessarily those of CNCzone and its management)

  3. #3
    Join Date
    Mar 2003
    Posts
    6855
    Hopfully it will encourage more members to upload after all its FREE.

  4. #4
    Join Date
    Apr 2003
    Posts
    90
    I just got X's as if there were no pictures to load
    Paul Riedlinger
    Let the chips fall where they may...I'm not going to clean them up!

  5. #5
    Join Date
    Mar 2003
    Posts
    6855
    Check you firewall or cookies etc.

  6. #6
    Join Date
    Apr 2003
    Posts
    1873
    Absolutely Paul, I have looked at many of them that had slipped by my not so regular visits to the gallery.

    I was getting nervous for a while though when I did not see the "Go to first un-read post" link.


    Ken

  7. #7
    Join Date
    Apr 2003
    Posts
    1876
    Definately a cool idea! :cheers:

    'Rekd
    Matt
    San Diego, Ca

    ___ o o o_
    [l_,[_____],
    l---L - □lllllll□-
    ( )_) ( )_)--)_)

    (Note: The opinions expressed in this post are my own and are not necessarily those of CNCzone and its management)

  8. #8
    Join Date
    Mar 2003
    Posts
    507
    I like it too!!!

    Klox
    *** KloX ***
    I'm lazy, I'm only "sparking" when the EDM is running....

  9. #9
    Join Date
    Jan 2004
    Posts
    490
    Hey Paul,
    What happened to the "Forum Jump" (by "Search")? thought that was a really cool thing, but now its gone.
    Stop talking about it and do it already!!!!!

    (Note: The opinions expressed in this post are my own and are not necessarily those of CNCzone and its management)

  10. #10
    Join Date
    Sep 2003
    Posts
    1113
    Sweet! I thought I did something and screwed up my folder and wasn't going to say anything! :cheers: Jim
    Experience is the BEST Teacher. Is that why it usually arrives in a shower of sparks, flash of light, loud bang, a cloud of smoke, AND -- a BILL to pay? You usually get it -- just after you need it.

  11. #11
    Join Date
    Mar 2003
    Posts
    6855
    Originally posted by Hobbiest
    Hey Paul,
    What happened to the "Forum Jump" (by "Search")? thought that was a really cool thing, but now its gone.
    It's back!

  12. #12
    Join Date
    Jul 2003
    Posts
    200
    Paul,

    Is there some way to have a picture posted in ANY forum ALSO (automatically) posted to the pictures area?

    For months I would come to the zone and look to see if anything interesting was happening here, by looking at the photos... Then one day I had some "extra" time, so i started reading through some threads and discovered that there were LOTS of pictures I'd never seen!

    Now I'm faced with wading through hundreds of threads looking for pics. It would be FAR better, IMO; if a person could look through the pictures as a first step to choosing a thread of interest to pursue...

    And it would also more clearly show someone who's just arrived what's REALLY happening here...

    Just my thoughts,

    Ballendo

  13. #13
    Join Date
    Mar 2003
    Posts
    6855
    That is a great Idea, I will look into it.

  14. #14
    Join Date
    Apr 2003
    Posts
    1876
    willook, isn't that a cousin of baggins?

    'Rekd
    Matt
    San Diego, Ca

    ___ o o o_
    [l_,[_____],
    l---L - □lllllll□-
    ( )_) ( )_)--)_)

    (Note: The opinions expressed in this post are my own and are not necessarily those of CNCzone and its management)

  15. #15
    Join Date
    Apr 2003
    Posts
    361
    Originally posted by ballendo
    Paul,

    Is there some way to have a picture posted in ANY forum ALSO (automatically) posted to the pictures area?

    Ballendo
    This would be very helpful. Hopefully, there will be hyperlink to go straight to the threads :rainfro:
    Stupid questions make me smarter...
    See how smart I've become at www.9w2bsr.com ;-P

  16. #16
    Join Date
    Mar 2003
    Posts
    201
    The pic's on the main page are great.
    (Note: The opinions expressed in this post are my own and are not necessarily those of CNCzone and its management)

  17. #17
    Join Date
    Jan 2004
    Posts
    137
    Hmm, I've never been able to see any pictures. Don't have the issue with any other sites.
    "Plan your work; Work your plan"

  18. #18
    Join Date
    Mar 2003
    Posts
    6855
    Originally posted by inthedark
    Hmm, I've never been able to see any pictures. Don't have the issue with any other sites.
    If the pictures are static on other site you will not have a problem, but it a setting in you browser. Put everything back to default. I'm using a firewall and have no problems.

  19. #19
    Join Date
    Jan 2004
    Posts
    137
    I have a software firewall, and a router, and after allowing 3rd party, for for this site. I can now see 'em.

    Thanks
    "Plan your work; Work your plan"

  20. #20
    Join Date
    Mar 2003
    Posts
    6855
    The picture work my running a script, and it need cookies to be enabled, glad you can now see them.

Similar Threads

  1. Updated Lost Foam Casting - Web Page
    By FrankG in forum Casting Metals
    Replies: 8
    Last Post: 02-19-2005, 01:18 PM
  2. Pictures of My Lathe & CNC MILL
    By studysession in forum Uncategorised MetalWorking Machines
    Replies: 14
    Last Post: 01-04-2005, 11:07 PM
  3. Cnc Pictures
    By rocketguy in forum DIY CNC Router Table Machines
    Replies: 4
    Last Post: 01-26-2004, 01:35 AM
  4. New Glossary Page
    By cncadmin in forum Community Club House
    Replies: 2
    Last Post: 08-19-2003, 01:40 PM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •