underthetire,

I just read a post in which you stated that you, at one time, worked for Yamezen.

I have a Brother TC-22A that I would like to retrofit with a centroid
cnc control. The documentation for the machine is very poor, and I have
all the documents that came with the machine.

The Maintenance Manual has wiring diagrams, but no information about
what the signals are, and what the signal characteristics are. Some of them
can be guessed at by their abbreviations, but not enough to be helpful.

Do you have any access to the information that I need, or do you remember
enough about the TC-22A to help me out.

I'm afraid that Yamezen won't help me because I didn't buy the machine from
them. I bought the machine used. I may have asked them for help once to
often (because of the very poor documentation), and they cut me off.

If you could, send me an Email at [email protected].

Any help you can provide me will be greatly appreciated.

Best Regards,

Paul Hoffman