Hi,
For those interested in creating their own low cost DIY or custom EDM machine, I wanted to share some info. I’ve been working on my own wire-edm machine for the past several years which is now steadily churning out quality parts. I’m open sourcing the complete mechanical design. All design CAD files can be found here:
https://baxedm.com/knowledge-base/ex...w-edm-machine/
For the electronics, I use Dynomotions KFlop + Kanalog solution.
The arc generator, which is the most complicated part, I now offer as commercial product on:
https://baxedm.com/
The generator can be purchased through the on-line webshop.
Here are some examples of the results:
https://baxedm.com/showcase-diy-mach...arc-generator/
Regards,
Mike