Re: Chinese CNC Lathe
Originally Posted by
automan1223
I am a fusion 360 user been working my way through the learning curve for the last year on that. Could never get the gwizard to run on my computer and have not had the time to find out why. What program are you using to copy and paste the g code from the wizard and uploading it to the lathe / GSK controller ? Does it have a usb slot or rs232 port. The manual is over 400 pages and I just cant seem to find the relevant information. I cant find any downloads and the ones I did Symantec throws out all sorts of warnings on running suspicious programs etc etc. I am looking at the one you have and the one with the servo spindle but that one takes a while to get from China. Where would one get way covers to upgrade this machine ? Thanks for posting.
Jon
The GSK980TDc has USB slot, it also supports RS232 port.
You can download the user manual on below page:
Download_GSK CNC User Manual Communication Software Free Download_CNCmakers Limited
If there is any part of the chinese machine broken or fail, you can find and get on paycnc,com.
http://cncmakers.com/cnc/controllers/CNC_Controller_System/CNC_Retrofit_Package.html