[GerryG]

Even if they don't, they're not that unwieldy to work with - I managed to get a 700*500 laser up two flights of stairs into my back bedroom with the help of a friend.

[mikemccand]

OK indeed they did have a pallet jack and were able to get it into the right corner of my garage!

On quick inspection so far everything looks good. The laser tube is intact, and has a paper on it showing it tested at ~120W. I've installed it physically but still have to plug in the two electrodes and the water inlet/outlet tubes.

The whole outside case was covered with a thin coat of lightweight oil, I guess to protect from rusting in storage and while traveling across the ocean.

The optics are all covered in plastic bags that I'll pull off when I'm ready to test.

I still need to confirm that I got both 2" and 4" focus lenses, and spare mirrors, and the right model chiller.

So far so good! I'm looking forward to my first burn

In hindsight the process of going through customs and being delivered to my house was wonderfully painless (except for the 25% tariff and other fees I had to pay).