[cinematic2]

- an Air-cooled RF laser tube of at least 30W (not DC as it does not engrave as fast or as well as RF due to power fluctuations and beam size)
- 12x24" minimum bed size.
- Ideally a tabletop machine, since my shop is on the 2nd floor and from my experience even the smallest lasers are obscenely heavy to lift. Something between 50-70kg (120-140lbs) would be perfect.
- has to be under $5000. that is the absolute total budget I have to work with.

Have 30W Trotec Speedy 300, 35W Epilog 24TT and 100W Synrad Galvo marking machine.