[Jake_3d]

OP: What would you expect the upper limit of your budget to be?

Also, on cosmetically sensitive parts like this, surface finish is a BIG contributor to the cost.

How many? Are these molds, or finished pieces?

Your questions are so open, it does not encourage answers. It encourages a barrage of questions. Anyone capable and interested in your parts will need a LOT more information. Starting with any budgetary guidelines.

Sent from my SM-G892A using Tapatalk

I see what you mean, thanks for being honest. Ideally, I'd like to make 10 different unique boxes over the course of 2-3 months, and anywhere from 25-50 of each at around $150 - $200 per box - finish ready. Boxes would range from (4.5 x 4.5 x 2 in) - (6.5 x 6.5 x 2.5 in) I don't know if that's realistic for the amount of work that would be needed, so please correct me if I'm wrong.

Edit: Also, if if wasn't clear, they will be finished pieces, not molded.

They'll be very expensive, as they'll take many hours of machining with very small tools to get fine details.
How big are those?

The one pictured is 4.5 x 4.5 x 1.25 in

[AnthonyOhio]

Good morning ,

I sent a pm. We would be glad to help with your project.

Thank you,

Anthony

I see what you mean, thanks for being honest. Ideally, I'd like to make 10 different unique boxes over the course of 2-3 months, and anywhere from 25-50 of each at around $150 - $200 per box - finish ready. Boxes would range from (4.5 x 4.5 x 2 in) - (6.5 x 6.5 x 2.5 in) I don't know if that's realistic for the amount of work that would be needed, so please correct me if I'm wrong.

Edit: Also, if if wasn't clear, they will be finished pieces, not molded.

The one pictured is 4.5 x 4.5 x 1.25 in