txcncman, you are helpful but I have to say sense you refuse to learn the newer stuff some of your answers are out dated and the software has changed allot.
Like your thought to change a color of a solid or any entity you can use the F4 but the first would be to right click on color then select the solid and then pick the color ,unless you want to preselect then it will prompted for new color.
Bottom line is keep helping as you have allot to offer but there is going to be time that I have to say this not true like in the past just because the software has changed.
PS I did offer you the X6 HLE so you could play and learn some of the new stuff.
guys have a great day and thank you both for your help on this forum.
(Note: The opinions expressed in this post are my own and are not necessarily those of CNCzone and its management)
Cadcam
Software and hardware sales, contract Programming and Consultant , Cad-Cam Instructor .