One more thing lets check the CNC controller side with a measurement. Check between the common - negative side to ground for power going to the CNC controller. Is that 12V common connected to ground?
Russ
Results 1 to 20 of 49
Threaded View
-
02-17-2019, 05:20 PM #21
Registered
- Join Date
- Jun 2005
- Posts
- 1730
Re: 500w chinese spindle interference
Reply With QuoteSimilar Threads
-
Upgrading my 3040 with a 500W spindle (replacing the 300W one)
By MustangviennA in forum Chinese MachinesReplies: 5Last Post: 01-31-2019, 11:53 PM -
500 watt DC spindle creates interference on arduino
By Alectro in forum Spindles / VFDReplies: 6Last Post: 09-26-2018, 10:53 AM -
Power 500W Spindle from 1/5kW VFD
By ajayre in forum Spindles / VFDReplies: 2Last Post: 08-12-2018, 12:24 PM -
Spindle Limit Switch Interference
By Macca05 in forum Spindles / VFDReplies: 6Last Post: 06-29-2018, 02:16 PM -
LU 15W sub spindle/ Zb axis interference parameters
By Clonekid54 in forum OkumaReplies: 6Last Post: 02-04-2014, 10:50 PM
Tags for this Thread
Posting Permissions
