SN 3041 DOM525
New to me as of yesterday. Got loaded in my garage and powered up today. I'm getting no video on the monitor - i'm new to these so i don't know if anything else is going on.
After researching here, i found that i can try a known good monitor to rule out the tube TV in the operator panel. It did not show any video either.
After that i hooked my laptop into the tube TV and i got some video but it looked awful. I'm assuming it works but is more than likely on it's way out.
I'm not sure of my next move. I'm assuming i have a bad cable, bad video card, or a bad mother board.
Can anyone point me in the right direction? I'm also looking for an operator/electrical and mechanical manual. All the links i've found here seem to be broken.
Thanks for the help.