[avongil]

Use .002 in filter settings if you are leaving .006.
I have fit parts like that on multiple fixtures in 64k. This is easy to do if you use Filter settings and xform properly. Send me your file or call your dealer.

[Heavy_Metal]

Hello guys,

This is for all FANUC-0i / 30i - users with max 512kb memory, I don't know if it works on the 0i-MC series.
I made a FANUCPRG.BIN file that you can try if you want, it's METRIC.
It's a Cimco-Edit 800kb sample-NC-file that's also stored in the zip-file, original file-name LEFTOVER.NC, 1Mb.
I removed the line-numbers, minimal Z-value is 0, but for safe run put a value of 100. or 200. in the Z - EXT (WORK) table.

Copy the FANUCPRG.BIN file on your flash-card, use soft-key [MEM CARD], not the [MEMORY-CARD], that key show all files on the card,
the key [MEM CARD] show only O1500, that's the program you need.
Look also on post #30 for a video on this item.

If it works you can run a 800kb file on a 512kb memory, now you can run larger programs.

Good luck.

Regards,
Heavy_Metal.

[Heavy_Metal]

Hi guys,

Post #40 was 8 weeks ago, is there any interest on this item.
Did someone purchased the Card Tool, or received it or tried the BIN-file, or want a BIN-file with it's own nc-code ?


Regards,
Heavy_Metal.