You need to use a single flute "O" flute, and cut with a high feedrate. at least 100ipm, maybe even 150-200ipm.
Results 1 to 4 of 4
Threaded View
-
03-03-2019, 03:20 PM #2
Community Moderator
- Join Date
- Mar 2003
- Posts
- 35538
Re: machining polycarbonate with a fixed-speed router - possible?
Gerry
UCCNC 2017 Screenset
http://www.thecncwoodworker.com/2017.html
Mach3 2010 Screenset
http://www.thecncwoodworker.com/2010.html
JointCAM - CNC Dovetails & Box Joints
http://www.g-forcecnc.com/jointcam.html
(Note: The opinions expressed in this post are my own and are not necessarily those of CNCzone and its management)
Reply With QuoteSimilar Threads
-
SuperPID + Bosch 16171 Fixed-Speed (25k) Router vs Bosch 1617EVS Variable-Speed
By mkbryant in forum Spindles / VFDReplies: 6Last Post: 01-18-2015, 06:04 PM -
Hybrid Design - Fixed Gantry Router for High Speed Aluminum Milling - Metal Nibbler 5
By Bob La Londe in forum Uncategorised MetalWorking MachinesReplies: 7Last Post: 04-10-2014, 05:16 PM -
Super-PID speed controller installation to Fixed speed Router
By Khalid in forum DIY CNC Router Table MachinesReplies: 14Last Post: 11-13-2010, 11:29 AM -
Fanuc O-TD-controlled lathe machine at low speed and fixed speed problem.
By bursa017 in forum FanucReplies: 0Last Post: 06-11-2010, 07:59 AM -
Variable vs fixed speed router?
By tryrook in forum WoodWorking TopicsReplies: 3Last Post: 04-01-2009, 02:10 AM
Tags for this Thread
Posting Permissions
