Right next to the pin settings. To the right of the active low.
Right next to the pin settings. To the right of the active low.
Gerry
UCCNC 2017 Screenset
http://www.thecncwoodworker.com/2017.html
Mach3 2010 Screenset
http://www.thecncwoodworker.com/2010.html
JointCAM - CNC Dovetails & Box Joints
http://www.g-forcecnc.com/jointcam.html
(Note: The opinions expressed in this post are my own and are not necessarily those of CNCzone and its management)
Excellent. Good to hear from you again. I will be here off and on for most of the day, like usual.
(Note: The opinions expressed in this post are my own and are not necessarily those of CNCzone and its management)
"If the women don't find you handsome, they should at least find you handy"
-RedGreen show.
:banana: :banana: :banana:WOOHOOIEEeEEEEEeeeee!!:banana: :banana: :banana:
YES!
JOHNNY 5's BRAINS ARE ALIVE!!!
:banana: :banana: :banana:YES!
Woohoo.....!!
wow. Excited?
or have we had a bit too much coffee?
congratulations once again.
(Note: The opinions expressed in this post are my own and are not necessarily those of CNCzone and its management)
"If the women don't find you handsome, they should at least find you handy"
-RedGreen show.
VERY EXCITED THANKS!! Now I just need a machine to put them on!
Video footage to follow in a few mins!
I set the pins as per HCNC instructions. (Pics 1 &2)
Then I changed the active low for the e-stop command which got rid of my error. (Pics 3 4 & 5)
Then ( :cheers: Gerry) I changed ,my output port to port 1 instead of 0 which it was, and that did it! (Pic 6)
JOHNNY 5'S BRAINS ARE ALIVE!!
:banana: :banana: :banana: :banana: :banana: :banana: :banana: :banana: :banana: :banana: :banana: :banana:
The attached video is a 60sec/1.4Mb realplayer file. But AFIK it will also work with Quicktime.
Just watched the video again.....sorry about the thumbs up .....
Wow, how simple was that setup in the end! 20:20 Hindsight.
Im thinking I might race them....I'll put $20 on X Axis....do I have any takers for Z and Y ?
OOOOO, OOOOO, I'll put $5 USD on Z!
Double or nothing, what ya say?
(Note: The opinions expressed in this post are my own and are not necessarily those of CNCzone and its management)
"If the women don't find you handsome, they should at least find you handy"
-RedGreen show.
Hey, Diarmaid, why don't you post it up on Google videos?or equivalent?
I ask that because my work computer doesn't have a video viewer, and will not allow for downloads.
(Note: The opinions expressed in this post are my own and are not necessarily those of CNCzone and its management)
"If the women don't find you handsome, they should at least find you handy"
-RedGreen show.
or Youtube. Even easier.
(Note: The opinions expressed in this post are my own and are not necessarily those of CNCzone and its management)
"If the women don't find you handsome, they should at least find you handy"
-RedGreen show.
Ok that was surprisingly easy! Google video it is.
I put it as unlisted so a search wont find it Im afraid. Heres the link:
http://video.google.com/videouploadf...c8327ea736d9a0
Looks good!
Now, on to the machine........
(Note: The opinions expressed in this post are my own and are not necessarily those of CNCzone and its management)
"If the women don't find you handsome, they should at least find you handy"
-RedGreen show.
Yup, onwards and upwards. Thanks for all the help with this folks. :cheers:
I cant wait to build my router now. Can't believe I've finally reached this point....it took a while!!