If the motor is a stepper, it is most likely a Lanchester (sp) damper.
Al.
Results 1 to 5 of 5
Threaded View
-
04-12-2019, 03:12 PM #4
Community Moderator
- Join Date
- Dec 2003
- Posts
- 24220
Re: Help Identifying A "Thing" on the second shaft of a motor. NOT an ENCODER....
CNC, Mechatronics Integration and Custom Machine Design
“Logic will get you from A to B. Imagination will take you everywhere.”
Albert E.
Reply With QuoteSimilar Threads
-
How can do ""manual stepper motor sizing for "rack and pinion"calculation""???
By Medhat93 in forum Mechanical Calculations/Engineering DesignReplies: 0Last Post: 03-03-2018, 01:50 AM -
1/2" Shaft Server / Encoder Problem
By Hellbringer in forum Benchtop MachinesReplies: 1Last Post: 05-01-2015, 05:48 AM -
"motor steps per resolution" and "driver microstepping" settings
By margni74 in forum LinuxCNC (formerly EMC2)Replies: 9Last Post: 10-24-2009, 08:33 AM -
Looking for a Coupling for 1/2" motor shaft to KR33 6mm shaft
By DonW in forum DIY CNC Router Table MachinesReplies: 7Last Post: 03-17-2008, 09:58 PM
Tags for this Thread
Posting Permissions
