I need some help on tool numbering. Basically I want Bobcad to call up the tools as per my sequence of operations not to bunch all the operations using tool number 1 as the first set of operations.
I have a programme where I am using 4 tools, I want tool number 1 to be used for some operations at the start of the programme, then go to tool 2, 3 and 4 then back to tool one for the final operation.
I am sure I have seen how do this in the past, but cannot find it now.
Regards
Barrie
Thread: Tool order in V30
Results 1 to 2 of 2
-
04-26-2019, 07:02 PM #1
Registered
- Join Date
- Apr 2016
- Posts
- 102
Tool order in V30
Barrie @ Composite Specialities Ltd. using BobCAD V29 Mill 3 axis Pro, Geomagic Design, Bricscad V16 and MOI V3
-
04-26-2019, 07:36 PM #2
Registered
- Join Date
- Apr 2016
- Posts
- 102
Re: Tool order in V30
Okay, got it figured, it is machining order that I needed to look at.
Barrie @ Composite Specialities Ltd. using BobCAD V29 Mill 3 axis Pro, Geomagic Design, Bricscad V16 and MOI V3
Reply With QuoteSimilar Threads
-
Need help with NC order
By Bad Wolf in forum MastercamReplies: 11Last Post: 06-29-2015, 09:04 PM -
How to re-arrange order of tool paths in V-25
By Dstamp in forum BobCad-CamReplies: 5Last Post: 08-27-2014, 03:27 AM -
Drilling and tool order number
By scottsss in forum SprutCAMReplies: 7Last Post: 02-21-2013, 10:07 PM -
Free Design tool with every order!
By Al_The_Man in forum Community Club HouseReplies: 9Last Post: 03-18-2011, 01:07 AM -
New VF-5 on order
By rbest27 in forum Haas MillsReplies: 2Last Post: 12-16-2007, 06:43 PM
Tags for this Thread
Posting Permissions
