Sure seems to indicate 4 tenths is the spec for the unit.
https://www.haimer-usa.com/products/...3d-sensor.htmlPlease take note: The given measuring precision of 0.01 mm / 0.0004" only applies if the original HAIMER probe tips are used.
Results 1 to 20 of 50
Threaded View
-
05-14-2019, 06:01 PM #15
Registered
- Join Date
- Oct 2008
- Posts
- 2105
Re: tormach limitation, or am I doing something wrong?
Bob La Londe
http://www.YumaBassMan.com
Reply With QuoteSimilar Threads
-
RDC6442G & RDWorks - Max speed limitation
By weitzd in forum Laser Engraving / Cutting Machine General TopicsReplies: 7Last Post: 03-29-2017, 08:10 PM -
rapid limitation in manual
By deadlykitten in forum OkumaReplies: 0Last Post: 08-05-2016, 10:16 AM -
Servomotors torque limitation
By ericbg2 in forum FanucReplies: 0Last Post: 07-22-2016, 06:57 PM -
Axial limitation DMU 60P hi-dyn.
By Raggus in forum CNC Machining CentresReplies: 3Last Post: 06-05-2008, 04:59 PM -
Are there any software limitation for Proxxon?
By jaru-eri in forum Benchtop MachinesReplies: 0Last Post: 06-20-2006, 01:06 AM
Tags for this Thread
Posting Permissions
