For locating pin holes I first drill then single point bore and then using this floating reamer holder I built using a 3/8" TTS holder ream to size.
Don
Attachment 422444
For locating pin holes I first drill then single point bore and then using this floating reamer holder I built using a 3/8" TTS holder ream to size.
Don
Attachment 422444
mike sr
What is the red layer in the middle of your floating reamer holder?
Red layer in the middle of the holder? Sorry don't understand what do you mean by that.
EDIT: I see now, interesting build.
Turcite X. https://www.boedeker.com/family/turcite
Don