Threaded through hole knobs.
Gerry
UCCNC 2017 Screenset
http://www.thecncwoodworker.com/2017.html
Mach3 2010 Screenset
http://www.thecncwoodworker.com/2010.html
JointCAM - CNC Dovetails & Box Joints
http://www.g-forcecnc.com/jointcam.html
(Note: The opinions expressed in this post are my own and are not necessarily those of CNCzone and its management)
Maybe try here https://www.mcmaster.com/knobs
Jim Dawson
Sandy, Oregon, USA
Fantastic ty guys, much appreciated... that'll do the trick. My mind was not getting results with dr google..
Ty Cheers...
Steve
Carbatec sell an Imperial clamp set.
I wanted 6mm threads and couldnt find any, so i made some. Used long flanged nuts off ebay.
Sent from my SM-G920I using Tapatalk
Thats a very good idea ty for the pics...
so I made some
Totally approve.
And I bet they were cheaper than McMaster-Carr!
Mind you, one can buy FOUR of them, with M6 thread, from eBay (from China) for about $1.60 total.
Cheers
Roger
The ones I found were only about 35mm diamtre.
Too small....not enough torque so mine are 60 mm dia.
Understood, but will the connection between the insert and the plastic take high forces? I wonder.
Sometimes the diameter of the knob reflects the strength of the unit.
Cheers
Roger
Thumb nuts, thumb knobs, thumb screws. I got set off ebay and another set off Amazon (if you have Amazon)
cheers mate..
Carl thanks mate,
They were good prices as well but they don't ship to AU..
I've managed to find some now on eBay..
Thanks for taking an interest.
Steve
m6*32 and m8*32
https://www.ebay.com.au/itm/Plastic-...72.m2749.l2649
I think they are the same as the ones Carl linked, cept cheaper still lol
Cheers,
Steve
Ok.I found them too small.
These were the ones I WAS going to buy but I amde some instead. Still can if it comes down to it.
M6 Tri Knob - Reinforced Nylon Knob with 3 Handles
Well I've ordered the others but Im not against having more lol.. nobody will grumble about have excess of anything..
Cheers and ty
i think https://kimkhihpt.com/thanh-ren