Good day to all. We are engaged in the development of postprocessors for CNC machines for SolidCAM. For all questions you can contact us by email: [email protected] YouTube channel: https://www.youtube.com/channel/UC6V..._as=subscriber
Good day to all. We are engaged in the development of postprocessors for CNC machines for SolidCAM. For all questions you can contact us by email: [email protected] YouTube channel: https://www.youtube.com/channel/UC6V..._as=subscriber
Does anyone have a Holz-Her Dynestic 7535 post?
Does anyone have a Holz-Her Dynestic 7535 post for AlphaCAM?
Hello,
Does anyone have a solidcam postprocessor for Hurco BMC4020HT ultimax3, 3axis
Thanks
Hi guys I need post processot OKUMA LB300 M ? samebody can help me please.
have you found this post processor? i need sinumerik 810m for solidcam 22016. please help...
HELLO
Does anyone have a ALPHACAM R2 2017 postprocessor for ARTIS-X Reichenbacher-Hamuel 5AXIS ?
HELP PLEASE
THANKS
Last edited by nikos76; 06-07-2019 at 12:21 PM.
salut
pt mastercam eu folosesc postul fanuc. merge lacrima
cred ca si in cazul tau e la fel.
try this .
is for scm record 120
looking for post for Okuma LB15/25 turn-mill lathe for SolidCam
Any posts for 4 axis turn mill lathes will be good too.
Thank you in advance.
looking for post for Okuma LB15/25 turn-mill lathe for SolidCam
Any posts for 4 axis turn mill lathes will be good too.
Thank you in advance.
- - - Updated - - -
looking for post for Okuma LB15/25 turn-mill lathe for SolidCam
Any posts for 4 axis turn mill lathes will be good too.
Thank you in advance.
Hello. I see everyone is asking, maybe this will be helpful to you.
There are HAAS VF2 and VF2SS. And also, there's one post processor for HAAS ST10, but C (Y) axis is disabled.
It's for SolidCAM.
Hello,
I need a post for a Fanuc controller for a CNC machine with 2 tables (X Y Z U axes). I tried changing every X to U to move the second table but I got weird movements. If someone has a similar setting, can you share with me the post you use please?
Thanks in advance,
[email protected]
CAM: Solidcam
Machine: Doosan DNM 5700
Controller: Siemens 828D
Turn-mill okuma lb25 MY post for solidcam pls.
Hello,
i need an Postprocessor for Heidenhain iTNC530 3 Axis Machine.
Can anywhere me help?
Thank you
Regards Tobias
Hi I need a post for Machine: YCM
CAM:Cimatron
Anybody can help me please.
Thanks
Hello,
I'm looking for Solidcam post processor for mitsubishi 70.
Or [email protected]
Any help would be great.
Thanks
Looking for a SCM Sigma 65 post
Hi all
I need a post processor for machine HAAS DT-1 and Mitsubishi M70 for SolidCam 2019 SP3 thanks for your help.