Broaching advice
I need to broach a 3/16" keyway in a 3/8" bore steel pulley.
I was advised by one shop that I may have a problem due to the broach taking up the width of the bushing.
Anyone see a problem to this? I have contemplated using the lathe trick with the spindle locked and moving the carriage/tool in the Z dir, manually with the appropriate tool, But I am not sure wether this is feasable with a steel pulley.
Anyone done it?
Al.
CNC, Mechatronics Integration and Custom Machine Design
“Logic will get you from A to B. Imagination will take you everywhere.”
Albert E.