Quote Originally Posted by mactec54 View Post
You should not take to much from what you read, they are all in the same boat as you are, they try different things instead of doing the build how it should be done from the start, what I can see by your photo's is wiring plugs Etc which are all problems for a system like this, a layout like this will always have a noise problems
I saw that you said that this cable was a requirement for a 2.2kw spindle in another thread: https://www.automationdirect.com/adc...ed/cf6-15-04-1

Should I replace my current cable with this and run it directly from the VFD right to the Spindle, no disconnect in between?