Check out the Allen Bradley TLY-A2540P-xJxxx. The J winding versions are 860 watts. You have to hunt them down on ebay, otherwise you will pay a fortune, but they are compact and will run well with the older AB Ultra 100 1398 DDM 009 or 019 drives which are easy to source cheap.
Thread: Servos for old Haas retrofit
Results 1 to 20 of 20
Threaded View
-
10-10-2019, 06:32 PM #17
Registered
- Join Date
- Feb 2005
- Posts
- 750
Re: Servos for old Haas retrofit
Halfnutz
(Note: The opinions expressed in this post are my own and are not necessarily those of CNCzone and its management)
Reply With QuoteSimilar Threads
-
Servos not moving when analyze ESS C62 DG4S Plasmacam retrofit
By bemor187 in forum Servo Motors / DrivesReplies: 3Last Post: 04-30-2018, 08:13 PM -
Best belts for 750w servos and 1.8kw spindle? Mill retrofit
By j3dprints in forum Linear and Rotary MotionReplies: 20Last Post: 02-17-2018, 06:23 PM -
Ancient CNC lathe retrofit / fanuc Servos
By fdm_guy in forum Servo Motors / DrivesReplies: 9Last Post: 01-09-2017, 10:18 PM -
Handyman cnc retrofit with dmm servos
By ira7481 in forum Bridgeport / Hardinge MillsReplies: 1Last Post: 03-28-2014, 10:19 PM -
plasma table retrofit: smart servos or closed loop steppers?
By Josh Leber in forum Waterjet General TopicsReplies: 12Last Post: 03-25-2006, 04:25 AM
Tags for this Thread
Posting Permissions
