Re: where will it fit?
Originally Posted by
Warren_3Deee
The door to the computer is on the tailstock end (right side if you are standing in front).... it swings out on the door, so you need about 12 inches to be able to open and close the door to get to the USB ports... though you could wire a USB extender/hub and then push against the wall and probably never have to open that door unless you need to swap out/fix the CPU.
I would leave enough room on the computer side (right) to get to the computer but you don't need much. However on the tailstock side (left) you need about 24" to swing the control cabinet out of the way to get to the high/low pulley and to load parts if you are using the collet closer or longer stock.
The Body Armor Dude - Andrew