Hi. I am very pleased about the support of MAC OSX. Unfortunately the software will not start under OSX 10.15 (Catalina). She ends immediately.
Greetings Daniel
Hi. I am very pleased about the support of MAC OSX. Unfortunately the software will not start under OSX 10.15 (Catalina). She ends immediately.
Greetings Daniel
OSX Mojave 10.13.4 (Mojave) don't run too.
I tested this on Sierra, High Sierra and Mojave. I see no reason not to work on Catalina.
I created subfolder named "PlanetCNC" in "Documents" folder and I copied files PlanetCNCMacOS.app, libPlanetCNCLibMacOS.dylib and libPlanetCNCCoreMacOS.dylib. TNG is started by clicking on PlanetCNCMacOS.app.
I'm not Mac user and I know very little about Macs but this worked on machines where I tested it.
Catalina have no longer support for 32 Bit Apps.
TNG for MacOS is 64bit app.
Has anyone except PlanetCNC successfully started the software?
Does the MK board need to be connected?
You probably don't allow applications from other sources to run on your Mac. You need to give this permission:
1. open terminal and type:
sudo spctl --master-disable
2. then open "System Preferences/Security & Privacy" and set "Allow apps..." to "Anywhere". See screenshot.
No, that's not the problem. I have enabled the release of the program via the Control Panel, of course.
Do you get any error, log or report?
No, No report
Please execute this in terminal:
sysctl machdep.cpu.features
and send me results
I have now installed High Sierra. But even with this version it does not start. But here is a log:
Process: PlanetCNCMacOS.app [1011]
Path: /Volumes/VOLUME/*/PlanetCNCMacOS.app
Identifier: PlanetCNCMacOS.app
Version: 0
Code Type: X86-64 (Native)
Parent Process: ??? [1]
Responsible: PlanetCNCMacOS.app [1011]
User ID: 501
Date/Time: 2019-11-01 10:14:40.027 -0700
OS Version: Mac OS X 10.13.6 (17G66)
Report Version: 12
Anonymous UUID: D3C25F72-B71C-DCBB-495D-684339CB0175
Time Awake Since Boot: 1600 seconds
System Integrity Protection: enabled
Notes: Translocated Process
Crashed Thread: 0
Exception Type: EXC_CRASH (SIGABRT)
Exception Codes: 0x0000000000000000, 0x0000000000000000
Exception Note: EXC_CORPSE_NOTIFY
Termination Reason: DYLD, [0x1] Library missing
Application Specific Information:
dyld: launch, loading dependent libraries
Dyld Error Message:
Library not loaded: @loader_path/libPlanetCNCCoreMacOS.dylib
Referenced from: /Volumes/VOLUME/*/PlanetCNCMacOS.app
Reason: image not found
Binary Images:
0x104f67000 - 0x104f67ff3 +PlanetCNCMacOS.app (0) <D84D20C3-EEBE-3DD8-BFE8-35691E866C6C> /var/folders/*/PlanetCNCMacOS.app
0x10fa17000 - 0x10fa61acf dyld (551.4) <8A72DE9C-A136-3506-AA02-4BA2B82DCAF3> /usr/lib/dyld
Model: iMac10,1, BootROM IM101.00D0.B00, 2 processors, Intel Core 2 Duo, 3,06 GHz, 12 GB, SMC 1.53f13
Graphics: ATI Radeon HD 4670, ATI Radeon HD 4670, PCIe
Memory Module: BANK 0/DIMM0, 2 GB, DDR3, 1067 MHz, 0x80CE, 0x4D34373142353637334548312D4346382020
Memory Module: BANK 1/DIMM0, 2 GB, DDR3, 1067 MHz, 0x80CE, 0x4D34373142353637334548312D4346382020
Memory Module: BANK 0/DIMM1, 4 GB, DDR3, 1067 MHz, 0x0198, 0x393930353432382D3032302E4130304C4620
Memory Module: BANK 1/DIMM1, 4 GB, DDR3, 1067 MHz, 0x02FE, 0x45424A3431554638424153302D41452D4620
AirPort: spairport_wireless_card_type_airport_extreme (0x168C, 0x8F), Atheros 9280: 4.0.74.0-P2P
Bluetooth: Version 6.0.7f10, 3 services, 27 devices, 1 incoming serial ports
Network Service: Wi-Fi, AirPort, en1
Serial ATA Device: WDC WD1001FALS-40U9B0, 1 TB
Serial ATA Device: HL-DT-ST DVDRW GA11N
USB Device: USB Bus
USB Device: IR Receiver
USB Device: USB Optical Mouse
USB Device: USB Bus
USB Device: BRCM2046 Hub
USB Device: Bluetooth USB Host Controller
USB Device: USB 2.0 Bus
USB Device: Built-in iSight
USB Device: USB 2.0 Bus
USB Device: Internal Memory Card Reader
Thunderbolt Bus:
next i will test El Capitano
Is it possible that this is just permission issue? I noticed that I used "chmod -R 777" on my folder.
ast login: Fri Nov 1 18:27:07 on ttys000
sysctl machdep.cpu.features
The default interactive shell is now zsh.
To update your account to use zsh, please run `chsh -s /bin/zsh`.
For more details, please visit https://support.apple.com/kb/HT208050.
COMD-2:~ admin$ sysctl machdep.cpu.features
What? You should get something like this:
sysctl machdep.cpu.features
machdep.cpu.features: FPU VME DE PSE TSC MSR PAE MCE CX8 APIC SEP MTRR PGE MCA CMOV PAT PSE36 CLFSH DS MMX FXSR SSE SSE2 SS HTT SSE3 PCLMULQDQ MON SSSE3 FMA CX16 SSE4.1 SSE4.2 x2APIC MOVBE POPCNT AES VMM PCID XSAVE OSXSAVE TSCTMR AVX1.0 RDRAND F16C
Oh well, now it does not work again, so it is not synonymous s.der file location.
Alo heavy birth. I now had to put the app in the app folder and start, then the files. And then let the program / App start ..
And that's how it works with High Sierra