Those ball screws seem pretty affordable, and design of the router is easier too. Do I need to worry about dust seals with such an affordable ball screw? Do I need worry about the ball screw whipping or jump roping on the 48" dimension?
Results 1 to 20 of 30
Threaded View
-
12-19-2019, 02:09 AM #15
Registered
- Join Date
- May 2014
- Posts
- 39
Re: Screw drives and linear rails and wood dust
Reply With QuoteSimilar Threads
-
Importance of placing ball screw between the linear rails vs above?
By Goemon in forum DIY CNC Router Table MachinesReplies: 24Last Post: 03-23-2018, 04:49 PM -
Connecting linear rails to steel tubes with screw threads and required wall thickness
By Goemon in forum DIY CNC Router Table MachinesReplies: 14Last Post: 08-05-2017, 04:50 AM -
Roller Ways vs Linear Rails vs Linear Rods (Im searched out and still lost)
By tjhj in forum Linear and Rotary MotionReplies: 17Last Post: 08-16-2015, 06:48 AM -
Why dont most people cover their threads and linear rails from chips/dust?
By autobot in forum Benchtop MachinesReplies: 5Last Post: 09-02-2011, 06:59 AM -
Thomson Bars, V-Rails, or Linear Rails
By Chuck_M in forum Linear and Rotary MotionReplies: 9Last Post: 12-18-2009, 09:39 AM
Tags for this Thread
Posting Permissions
