[dlll]

Hello

I am wondering if you still have the cybermation 700a.
As I have a similiar table I am trying to get it working, the x axis encoder is damaged and needs replacement.
Unfortunately because it is old, the part sticker is removed and I cannot find any info about it, even the similar one on the Y axis.
Could you send me a photo of the encoder sticker that you have? I would really appreciate it as the machine is not working at all because of the encoder.

Regards,
Bashar

did you every get the cybermation running i have one would very much like to talk to you about it
thank you daniel

[Bashar85]

did you every get the cybermation running i have one would very much like to talk to you about it
thank you daniel

Hello Daniel,

Yes I actually did.
I took apart the encoder and found the glass to be broken, I found a little number on the glass which stated the resolution and I bought one.
I did not have the software to control it through the PC but I could only move the head using the joystick of the table controller.
This way I did not have much use of it and now it is back offline.

Regards,
Bashar