Hi,
Does anyone know how to implement the following new updates to madCAM in the Post Processor.
I use Mach4.
There are no new post processors in the update.

I am mainly interested in G93.
R
egards,
Mauri.

• Two new variables for the post processor. "cutter_tool_list" and "machining_time". It is possible to get all cutters that are used and the total machining time listed in the output file. (3X,4X,5X and 5Xtra)
• Post processor support for inverse time feed (G93). (3X,4X,5X and 5Xtra)