G'day folks,
I have an axbbe controller and wanting to add a touch off plate.
Trolled the forums and it seems simple enough, watched and downloaded macro from you tube - Paul from cncnutz.
Not happening for me atm,
As I understand it,
Connect wire to an input second wire to a ground.
Configure uccnc input add port and pin active low and you should be good.,
The axbbe inputs is confusing me I have inputs 11 to 16 with + and -.
In my case Im adding wire to pin 11+ and a wire to a ground.
configure uccnc pin 11 port 2
I get a solid green light.
Am I meant to wire the 11- to anything, I cant find anything specific to the axbbe so totally confused.
Cheers,
Steve