Hey G'day,
Does the wiring for limit switches need to be shielded,
I'm getting some strange behavior reset button will randomly enable.
Unable to switch it off. Even using override not helping. I then disable limit switch/re enable good for a while.
My limit switches will not work in series for whatever reason, each switch wired separately functions ok.
There are no breaks in the wiring all seems good.
If I use some test wire all switches test ok, doing homing routine axis by axis function ok.
If I use the wires through the cnc loom, Y (I have a slave) the homing is interesting to say the least. One side seems to advance quicker than the other or at moments move in opposite directions to each other its a ballet dance.
Breaking out the test wires the switch functions ok and the homing sequence is ok.
Cheers,
Steve