Hi All,
As input voltage, my HBS86H accepts AC from 20 to 70 Volts, hence as imple transformer should do but I am not sure about the needed power.
The data sheet only mentions peak current of 6A but this must be related to the output, i.e. towards the motor.
Based on my calculation, the peak power should be 5V x 6A = 30 W.
If I connect three controllers in parallel, my transformer should support around 90W, so with 200W I should definitely be on the safe side.
1. Is my assumption and calculation correct ???
2. Can I really put three HBS86H drivers in parallel or could there be some side effects consdering the 'peaky' nature of the power consumption ?
Thanks for your help