Hello,
we are Midnight Manufacturing,
We are brand new to the digital/online community and CNCZONE.
We have been operating for two years offline manufacturing CNC equipment, servicing machines and plasma cutting locally.
over the course of 2-3 years before we started this business we developed our own CNC designs for many odd applications and quite a few little attachments and accessories.
the Torch Height Controller being one of them, it has been tested in our environment for the entire two years of operation so we thought we should share it being it's really easy to use.
that being said we decided to open the store a little shy of being prepared, and we happened to sell a few.. and they have given us good reviews. but in looking through them I was disappointed to see arguments brewing about the hardware being that of myth and legend and that no such thing could exist.
so to alleviate the stresses involved because it's very understandable to be skeptic of a new product on the market. we have decided we will give a few away(we pay shipping too)
Please put in your request on this thread, factors deciding who we will give them too will be:
-seniority
-post count and relevancy of posts
-general rapport with community members
-and have a plasma with a divided voltage of <10 Volts
-have a method of triggering the THC either ARC OK or using G-code to trigger a relay.
-be willing to install it in a decent manor of time and also willing to post a follow up of your experiences in this thread.
-have the desire to stop setting your THC during normal operations
so please post a basic machine rundown of what you have and why you might enjoy having an auto THC, and we will consider you for the freebie.
Thanks in advance and we hope you can all benefit from this as we have.
and we hope that we can join the community without any hard feelings, we are a family based company trying to sell something we believe is a good product, and we back it with a 2 year warranty.
we look forward to your interest and responses.
MMC.