Almost there...
https://youtu.be/sXU0e2dmtwU
![]()
Almost there...
https://youtu.be/sXU0e2dmtwU
![]()
Double post
fits!
![]()
new encoder seems to work... a bit better
![]()
You can see the higher resolution. Very nice.
Cheers
Roger
I think I get a D for effort...
![]()
Cutter relief is important.. (the one on the right was up the tool - causing the corner issues)
![]()
Just because...
![]()
I do actually talk at about 6:30m