588,644 active members*
4,701 visitors online*
Register for free
Login
IndustryArena Forum > CAM Software > Autodesk CAM > issues with gcode file produced from fusion 360 used in mach3

Thread: issues with gcode file produced from fusion 360 used in mach3

Results 1 to 20 of 21

Hybrid View

  1. 05-07-2020, 05:11 AM #1
    Jim Dawson's Avatar
    Jim Dawson
    Jim Dawson is offline Community Moderator
    Join Date
    Dec 2013
    Posts
    5722

    Re: issues with gcode file produced from fusion 360 used in mach3

    I normally set all the heights in Fusion from the model (work) top. Your Z home position should be well Z positive from the work top, and everything below the work top should be Z negative. Check your heights in Fusion.
    Jim Dawson
    Sandy, Oregon, USA
    Reply With Quote Reply With Quote
  2. 05-07-2020, 03:50 PM #2
    kansaswoodrat
    kansaswoodrat is offline Neuer Benutzer
    Join Date
    Jan 2013
    Posts
    17

    Re: issues with gcode file produced from fusion 360 used in mach3

    Will regenerate the gcode and try later today...thanks
    Reply With Quote Reply With Quote
« Previous Thread | Next Thread »

Similar Threads

  1. Fusion 360 import spline - Create weave shape - post gcode
    By wjbzone in forum Autodesk CAM
    Replies: 3
    Last Post: 04-22-2020, 05:09 PM
  2. fusion 360 gcode output
    By toyshop in forum Autodesk CAM
    Replies: 2
    Last Post: 02-10-2019, 02:05 AM
  3. Freelancer Needed in MA Area - Fusion 360 - GCode - Mach3
    By abinboston in forum Employment Opportunity
    Replies: 0
    Last Post: 09-07-2017, 08:21 PM
  4. Will Fusion post the correct Gcode for a Multicam Router
    By MileHigh13 in forum Autodesk CAM
    Replies: 1
    Last Post: 04-26-2017, 12:18 AM
  5. Mach3 autozero issues after loading GCode
    By daybowbow in forum Mach Software (ArtSoft software)
    Replies: 1
    Last Post: 11-08-2014, 11:35 AM

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  

Forum Rules