Hi everyone,
we have an issue transferring program on an Fanuc 6MB (issue both upload or download)
we put it on EDIT mode then press O-9999 READ nothing try P-9999 PUNCH
it stays on the screen O-9999 or P-9999
I've double check the protocol the same on both 4800 7 - 1 - EVEN
I've change the cable (bough a new one and tested)
same issue.
the other guy say it might be a chip on the EPROM card chip 10 and chip 20 (but i disagree) what do you guys think ?
I've check for a switch that could be broken but nothing and the switch on the main board is turn to OFF and there is no light on the main board at would indicate an error .
diag: # 41 was changing when i was moving from EDIT - TAPE - JOG -etc... so the contact is good there.
no E-STOP is engage as i can work with the machine in manual mode
Could it be the EPROM card ? does anyone now what the chip 10 and 20 doe son the EPROM Card ?
thank again for the help
Attachment 444460Attachment 444458