[cncmakers001]

Hello,
Been scouring the web trying to find some info on this stepper driver.
Does anyone have any info on it or where I could find some?
It's in a Multicam/ AXYZ machine.

Thank you.

What is the detail model name of this stepper driver?

[mrgame1988]

What is the detail model name of this stepper driver?

They are not available to the public. They are custom made unfortunately.

[karuba]

Hi mrgame1988,
Thanks for that. I did find this as well, which was a great help. Steppers only go in the one direction though....?
Running Mach3, Smooth Stepper with an Ocean Controls KTA 205 for a breakout board. P1 Step, P2 Direction, P3 COM. on the driver side. Getting the standard 0-5v(depending on the direction) for the direction pins.
Tried hi/low combinations to no avail. It has to be something simple that I'm missing...... surely.
Any idea on the jumpers to the right of the step/dir inputs?

One thing that has me a little perplexed the original break out board (AXYZ AMC 0004G), the pinout (P41) diagram suggests Pin1 to be 12v on the BOB, then step (pin 2) and direction (Pin 3), but the stepper motor driver page says 5v+... for pin1?

I really appreciate the help.

Thank you..

A

[KateHowell]

Hi mrgame1988,
Thanks for that. I did find this as well, which was a great help. Steppers only go in the one direction though....?
Running Mach3, Smooth Stepper with an Ocean Controls KTA 205 for a breakout board. P1 Step, P2 Direction, P3 COM. on the driver side. Getting the standard 0-5v(depending on the direction) for the direction pins.
Tried hi/low combinations to no avail. It has to be something simple that I'm missing...... surely.
Any idea on the jumpers to the right of the step/dir inputs?

One thing that has me a little perplexed the original break out board (AXYZ AMC 0004G) stocktwits amc https://codeprozone.com/code/html/14...twits-amc.html, the pinout (P41) diagram suggests Pin1 to be 12v on the BOB, then step (pin 2) and direction (Pin 3), but the stepper motor driver page says 5v+... for pin1?

I really appreciate the help.

Thank you..

A

This is really amazing and I appreciate this work.

[karuba]

It would still be nice to get them working though. As there is nothing wrong with them. Just my limited knowledge......

[karuba]

There isn't anything on them besides what you see in the picture...