Reduce the acceleration by 50% and see if it helps.What else is there or could it be ? Any thoughts?
Reduce the acceleration by 50% and see if it helps.What else is there or could it be ? Any thoughts?
Gerry
UCCNC 2017 Screenset
http://www.thecncwoodworker.com/2017.html
Mach3 2010 Screenset
http://www.thecncwoodworker.com/2010.html
JointCAM - CNC Dovetails & Box Joints
http://www.g-forcecnc.com/jointcam.html
(Note: The opinions expressed in this post are my own and are not necessarily those of CNCzone and its management)