Surfacing that plywood is not going to result in a very good finish.
You'd be better off adding some MDF on top and surfacing that.
Just get a cheap bit like this.
https://www.amazon.com/Yonico-14973-...480408&sr=8-28
Results 1 to 20 of 26
Threaded View
-
09-07-2020, 01:07 PM #24
Community Moderator
- Join Date
- Mar 2003
- Posts
- 35538
Re: Help with tuning Stepper motor& Drive on UCCNC AXIS X,Y,Z
Gerry
UCCNC 2017 Screenset
http://www.thecncwoodworker.com/2017.html
Mach3 2010 Screenset
http://www.thecncwoodworker.com/2010.html
JointCAM - CNC Dovetails & Box Joints
http://www.g-forcecnc.com/jointcam.html
(Note: The opinions expressed in this post are my own and are not necessarily those of CNCzone and its management)
Reply With QuoteSimilar Threads
-
Wantai SS880 closed loop stepper drive tuning
By danilom in forum Stepper Motors / DrivesReplies: 3Last Post: 03-12-2020, 03:07 AM -
stepper motor tuning Need help)
By miwaba in forum Stepper Motors / DrivesReplies: 2Last Post: 06-14-2017, 03:14 AM -
Stepper Motor Tuning
By bcmaint in forum Dynomotion/Kflop/KanalogReplies: 12Last Post: 06-09-2016, 01:48 PM -
help with stepper motor tuning
By Dale gribble in forum Stepper Motors / DrivesReplies: 28Last Post: 11-25-2009, 10:24 AM -
3 axis stepper motor drive
By Paul V in forum Shopmaster/ShoptaskReplies: 6Last Post: 02-24-2007, 09:34 PM
Tags for this Thread
Posting Permissions
