Surfacing that plywood is not going to result in a very good finish.
You'd be better off adding some MDF on top and surfacing that.
Just get a cheap bit like this.
https://www.amazon.com/Yonico-14973-...480408&sr=8-28
Surfacing that plywood is not going to result in a very good finish.
You'd be better off adding some MDF on top and surfacing that.
Just get a cheap bit like this.
https://www.amazon.com/Yonico-14973-...480408&sr=8-28
Gerry
UCCNC 2017 Screenset
http://www.thecncwoodworker.com/2017.html
Mach3 2010 Screenset
http://www.thecncwoodworker.com/2010.html
JointCAM - CNC Dovetails & Box Joints
http://www.g-forcecnc.com/jointcam.html
(Note: The opinions expressed in this post are my own and are not necessarily those of CNCzone and its management)