In episode 12, I used the MAHO MH400E I converted to LinuxCNC, to make tapered gibs for the saddle.
Mark
In episode 12, I used the MAHO MH400E I converted to LinuxCNC, to make tapered gibs for the saddle.
Mark
Regards,
Mark
Now that the errors in the geometry of the main components has been addressed, I can move on to the CNC relevant stuff...
Mark
Regards,
Mark
Episode 15 is now up. Covers the spindle motor, and includes some Maho Slotting head action.
Regards,
Mark
Episode 16 deals with the Encoders, drivers and enclosure.
Regards,
Mark
Since I messed up Episode 17 last week...
https://www.youtube.com/watch?v=cLPPT1a20cw
... I didn't post a link to it then. Episode 18 is now up and back to the normal standard...
https://www.youtube.com/watch?v=1JFKs1kYJxM
Mark
Regards,
Mark
Episode 19 is now up...
https://www.youtube.com/watch?v=QzSfhxELxp8
Happy fathers day from Austria,
Mark
Regards,
Mark
Hi Guys, I just uploaded episode 20.
https://www.youtube.com/watch?v=L6KxpwCrEYY
Mark
Regards,
Mark
Episode 21 is now in Youtube.
https://www.youtube.com/watch?v=0NMn3kzvA0o
Mark
Regards,
Mark
Here is the link to Episode 22
https://www.youtube.com/watch?v=xTDwz-XExNo
Mark
Regards,
Mark
Episode 23 is my challenge with the pc Giybyte PC...
https://www.youtube.com/watch?v=7xNS2MWN8Js
Mark
Regards,
Mark
This week, I'm configuring the Mesa 7i96 Interfce card...
https://www.youtube.com/watch?v=YkQ8FZg4ZX0
Mark
Regards,
Mark
In episode 25, I finished the controller, and got almost everything installed and tested.
https://youtu.be/i6wO_pgAIuI
Mark
Regards,
Mark
Episode 27 is up...
https://www.youtube.com/watch?v=ATdBXBOCII8
Mark
Regards,
Mark
looking good Mark!
on a side note, I remember you had a cool wankle engine you were building a long time ago. What happened with that project?
Oh wow, I remember that being one of the motivations to get into CNCing, but by the time I had the machines I moved on to other interests, and have never gotten back to the Wankel engine. Maybe one day.
I just uploaded episode 29...
https://www.youtube.com/watch?v=G1Im42hJMbY
Mark
Regards,
Mark
E30 is up. The first time I used tool offsets, including a crash due to my lack of understanding.
https://youtu.be/XbBYk9M4wnE
Enjoy,
Mark
Regards,
Mark
great series!
Been fun watching them.
Thanks guys.
Mark
Regards,
Mark