I assume that the 1100 PDB is very similar to the 770 one, If so, adjusting the protrusion of the bolt from the pneumatic cylinder should allow controlling how far the collet stick out. I'm curious though. Why do you care?
I assume that the 1100 PDB is very similar to the 770 one, If so, adjusting the protrusion of the bolt from the pneumatic cylinder should allow controlling how far the collet stick out. I'm curious though. Why do you care?
I like to wipe the spindle nose between tools with my hand and its hard to do with the collet protruding thru a bit and I like to seat the tool and rotate the holder a bit just to insure a good seat against the spindle nose, just force of habit I guess, no reason otherwise.
mike sr