I have been working with KMotionCNC in the Tool Setup Screen (M0 - M30). I've been able to get the spendle working CW/CCW/stop but am having trouble with how to get my axis working while running g code. My init. C program was done but the axis and most g-code telling the axis to m ove will not work, what am I missing?
Results 1 to 20 of 215
Threaded View
-
12-11-2020, 08:40 PM #5
- Join Date
- May 2020
- Posts
- 252
Re: starting my C program, any guidance would be apreciated.
Reply With QuoteSimilar Threads
-
Starting at New CNC Build -- Guidance Needed!!
By dtmille2 in forum DIY CNC Router Table MachinesReplies: 21Last Post: 01-02-2013, 05:00 AM -
Need some guidance on starting out
By AlanDv in forum DIY CNC Router Table MachinesReplies: 2Last Post: 08-20-2011, 05:13 AM -
starting program
By chucker in forum FanucReplies: 2Last Post: 11-10-2009, 07:28 PM -
Starting program in fanuc 6m
By Bolle_Ma in forum FanucReplies: 4Last Post: 10-17-2008, 09:11 AM -
Starting knee-mill retrofit. Your input appreciated.
By jamma in forum Uncategorised MetalWorking MachinesReplies: 2Last Post: 03-01-2007, 05:41 PM
Tags for this Thread
Posting Permissions
