Mach3 only needs 1 pulse per rev for threading. It can't use an encoder.
Results 1 to 18 of 18
Threaded View
-
12-25-2020, 02:27 PM #2
Community Moderator
- Join Date
- Mar 2003
- Posts
- 35538
Re: Photoelectric encoder with mach3 turning
Gerry
UCCNC 2017 Screenset
http://www.thecncwoodworker.com/2017.html
Mach3 2010 Screenset
http://www.thecncwoodworker.com/2010.html
JointCAM - CNC Dovetails & Box Joints
http://www.g-forcecnc.com/jointcam.html
(Note: The opinions expressed in this post are my own and are not necessarily those of CNCzone and its management)
Reply With QuoteSimilar Threads
-
photoelectric sensor
By iancraggs in forum DNC Problems and SolutionsReplies: 0Last Post: 03-06-2019, 11:11 PM -
newbie! need help with photoelectric sensor
By iancraggs in forum CNC Machine Related ElectronicsReplies: 0Last Post: 03-06-2019, 10:51 PM -
BANNER Photoelectric reflective sensors, large lot w/ reflectors and mounts.
By diyengineer in forum For Sale OnlyReplies: 0Last Post: 09-02-2014, 10:50 PM -
photoelectric switch circuit
By Malph in forum CNC Machine Related ElectronicsReplies: 8Last Post: 05-19-2009, 05:06 AM
Tags for this Thread
Posting Permissions
