Hi.
This is my first post. I'm using a Mazak Quick turn Nexus 100 with Mazatrol 640T control.
There's a problem with the X axis relief. When using BAR IN, the tool starts .02 smaller then the cutting point and has a relief of .01. Even if I change U4 parameter, it just adds it to the .01
If I use a BAR OUT, it does the same thing
It's like there's a basic .01 x relief plus what is added in the U4 parameter. It doesn't use to do that and I can't seem to find the source.
Thanx for your help.
Ian