Hello,
This is my first post in this forum, and I really find it very useful.
I an trying to design a CNC router for wood and aluminum cutting .
I attached the first design of my CNC. I used 4040 and 4080 aluminum profiles in addition to aluminum plates.
kindly any advices or recommendations with the structure design.
components:
2pcs HGR20 - 400mm linear rail
2pcs HGR20 - 700mm linear rail
2pcs HGR20 - 1000mm linear rail
12pcs HGH20CA Carriage
1pc SFU1605 - 400mm ballscrew with ball nut
1pc SFU1605 - 700mm ballscrew with ball nut
1pc SFU1605 - 1000mm ballscrew with ball nut
(3pcs ballscrew according to BK12/BF12 end machined)
3sets BK/BF12 Support
3pcs 8*10mm coupling
3pcs 1605 Nut housing
spindle 2.2kw with water cooling.
nema 23 2.5Nm.
Mach3 controllers