I am building both mini mills and router cnc machines and I want drive components interchangable between them. Is 3 nm a good driver for the axis' on a wood router? such as these:
https://www.aliexpress.com/item/4000...archweb201603_
I am building both mini mills and router cnc machines and I want drive components interchangable between them. Is 3 nm a good driver for the axis' on a wood router? such as these:
https://www.aliexpress.com/item/4000...archweb201603_
Are you planning on swapping motors between machines?
It will not be easy to mount and unmount motors and the associated wiring.
I have shared drivers / control electronics / computer for a mill, lathe and router.
Each machines has its own motors (all the same model steppers). I use an industrial 48pin connector to swap the connection for the drivers etc.
7xCNC.com - CNC info for the minilathe (7x10, 7x12, 7x14, 7x16)
Depends on how big the machine is, and how fast you want it go.
Gerry
UCCNC 2017 Screenset
http://www.thecncwoodworker.com/2017.html
Mach3 2010 Screenset
http://www.thecncwoodworker.com/2010.html
JointCAM - CNC Dovetails & Box Joints
http://www.g-forcecnc.com/jointcam.html
(Note: The opinions expressed in this post are my own and are not necessarily those of CNCzone and its management)